Design & Define Hot Wax

• Heat the wax until it is completely melted and smooth with a cream/honey consistency. 
• Check the temperature of the wax before use with a patch test on the inside of the wrist.

TEMPERATURE: Brow Code Wax is best used at 70° Celsius/158° Fahrenheit. The wax should be a honey consistency. If you find the wax too stringy, this means the wax is not warm enough.

We recommend using an oil-free Cleanser and a cotton pad to wipe over the brow before waxing to cleanse the skin of any makeup and oils, prior to waxing.

• Always support the skin by pulling tight as you apply and remove wax to avoid discomfort and skin peeling.
• Apply wax to the brow in small sections with a wooden spatula, starting with the top end of the brow and working in the direction of the hair growth. NOTE: Starting here allows for better flow and grip as this is where the hair ends.
• Leave a thicker edge at the end of the stip of wax applied.
• After spreading the wax, move the stick back and forth to tie off any stringy wax.

• Allow the applied wax to cool (min 10 seconds). 
• Raise the edge of the strip of wax slightly then pull off sharply pulling against the hair growth direction. 
•  After hair removal, apply after wax oil.

• Avoid extreme heat such as hot baths or showers, saunas and steam rooms for at least 24 hours.
• Avoid swimming and sunbathing (including sunbeds or any exposure to UV light) for at least 24 hours.
• Avoid exercise or anything that makes you sweat for at least 24 hours.
• Do not apply any perfumed products to the area for 24 hours.
• Wash your hands before scratching or touching the area or try and avoid touching the area altogether.
• Avoid the use of make-up on the brow area for 24 hours.
• No self-tanning products on the area for 24 hours.